Shock Absorbing - Heavy Duty
Shock absorbing bollards for industrial/commercial applications to protect assets by absorbing impact from slow moving heavy vehicles. Suitable for factories, warehouses and carparks etc.
The Shock Absorbing Bollard (SAB) has the ability to shift sideways if hit at or near ground level. If the impact is higher up the bollard, it can tilt up to 8 degrees, at which point it locks up offering maximum protection. Alternatively if the contact is of a deflection or glancing nature, the SAB is able to rotate through 360 degrees.
Each SAB comes fitted with high impact polyethylene protective sleeves. The sleeves are U.V. stabilised and won’t fade, rot, rust or peel. Never have to paint chipped, scratched or rusted bollards again. (Click here for more information on protective bollard sleeves).
SABs are designed to be used anywhere vehicles are manoeuvring at low speeds, such as carparks and warehouses etc. The self centering design means the SABs can take repeated impacts without incurring permanent damage. They simply absorb the impact and return to their original position. These unique characteristics result from the combination of clever engineering and the use of high tech composite materials. SABs are available in 140mm diameter in either core drilled in-ground or surface mounted models.
Note: Not recommended for high speed traffic environments.
|Description:||Shock absorbing bollard - Heavy duty|
|Finish:||HDG with polyethylene sleeves (PE).|
|Casing size:||140mm dia. x 1200mm high x 5mm wall.|
|Shaft size:||50mm solid steel Grade K1045.|
|Installation:||Surface mount or Core drilled.|
Use these part numbers when enquiring about this product
|SAB140-CD||140mm dia. shock absorbing bollard – Core drilled|
|SAB140-SM||140mm dia. shock absorbing bollard – Surface mount|
Suitable for industrial and commercial applications for asset protection from slow moving heavy vehicles.
Ideal for factories and warehouses.
Minimises damage by absorbing repeated low speed impacts.
Can move in three directions simultaneously to absorb impact and return to original position.
Surface mount or core drilled models available.
Reduces damage to floors caused when rigid bollards are pulled from their mountings.
Request a quote or more information
We are happy to help you with any enquiries you have about our products, on-site consultations, site safety audits and installations.
To contact us, please phone us on 1300 55 33 20 (International: +61 3 5278 8666).Alternatively, please submit the form below, including any details you can supply that help to explain your requirements, and we will respond promptly.